Appearance
Camera
Makes its layer the comp's camera: every 3D layer is drawn as this camera sees it.
Category: 3D Menu path: 3D > Camera
Ports
| Port | Type | Direction | Description |
|---|---|---|---|
out | imageRgba16f | output | Wire it to Output, optionally through Transform 3D nodes and lens effects. With effects after it, this is everything composited below the camera layer (see The lens); otherwise it draws nothing |
Parameters
| Param | Type | Default | Description |
|---|---|---|---|
fromLayer | string | None | From Model: a Model layer in the comp whose file holds a camera (glTF, FBX or Alembic). The camera follows it — its placement and lens, animated, lined up with the model through that layer's Fit and Transform 3D — and Zoom, Position, Target and the rotations are hidden. Transform 3Ds after the Camera node still move it |
zoom | scalar | comp width × 1.389 | Distance (px) at which z = 0 shows at 1:1. The default matches a 50 mm lens |
position | vec3 | 0, 0, −zoom | Where the camera is, in comp pixels |
usePointOfInterest | boolean | on | Aim the camera at Target. Off: it looks along +z, turned by the rotations |
pointOfInterest | vec3 | 0, 0, 0 | What the camera aims at |
orientation | vec3 | 0, 0, 0 | Turns the camera (degrees) |
rotation | vec3 | 0, 0, 0 | Turns the camera about X, Y and Z (degrees); Z rolls it |
depthOfField | boolean | off | In the Depth of Field section as Enabled: blur what is nearer or farther than Focus |
focusDistance | scalar | zoom | Focus: distance from the camera (px) that is sharp |
aperture | scalar | 25 | Lens opening (px). Larger = blurrier out of focus |
blurLevel | scalar | 1 | Multiplies the blur (1 = as the lens gives it, 0 = none) |
How It Works
The topmost enabled layer whose chain starts at a Camera is the comp camera; with none, Caddis uses a default camera that shows z = 0 exactly as in 2D. A camera layer never draws. Transform 3D nodes between the Camera and Output move it, so a rig is a stack of Transform 3D nodes.
The lens
Effects between the Camera node and Output are the camera's lens: Camera → Chromatic Aberration → Barrel Distortion → Output puts both on everything composited below the camera layer, after its depth of field, and nothing above it. The Camera node then outputs that picture (as an AdjustmentSource does), and the result replaces it; the layer's Opacity fades between the two.
Where the camera layer sits in the stack decides what goes through the lens. Put a 2D border, title or logo above it to keep it clean; anything below, 2D backgrounds included, is seen through the lens. A 3D layer above the camera is still filmed by it but skips the lens.
Only the comp's active camera applies its lens, and the working views (Custom View, Front, Top, Left) look without it.
To place the camera by navigating the Viewer (orbit, pan, dolly, frame), turn on Lock Camera to View beside the Viewer's view menu; see 3D › Lock Camera to View.
Usage Examples
Basic: dolly in
Key Position Z from −2667 to −1500 on a 1920-wide comp to push in on the scene.
Creative: orbit
Camera → Transform 3D → Output, then key the Transform 3D's Rotation Y from 0 to 360 with its anchor at the scene's center.
Tips
- With Use Target on, moving the camera keeps it aimed at Target.
- The lens sees past the frame: what lies below the camera is drawn half as wide again on each axis, so a strong Barrel Distortion pulls real picture into the corners (the 3D scene and full-frame layers continue; 2D layers that end at the frame still end there). The frame itself is exactly what it was without the lens, and the distortion is measured on the frame.
- A camera layer with a lens splits the 3D layers into those below it and those above, which no longer cross each other.
- Depth of field behaves like a real lens: blur grows with distance from the Focus plane and levels off far away (at Aperture ÷ 2 × Zoom ÷ Focus × Blur Level). It uses the same blur as the LensBlur node, applied to the 3D layers only, and only through the comp camera (working views show the scene sharp).
Related Nodes
- Transform3D — places layers as cards in 3D